Most Ottawa renovations follow the same broken sequence. Homeowner gets a designer to draw something nice. Designer hands drawings to a general contractor. GC realizes the drawings will not actually build because details were missed. Change orders start before demolition is finished. Six months in, the budget is 30 percent over and the homeowner has stopped enjoying the process.
We have run Dream Touch since 2005 with a deliberately different model. Every piece of how we work was built to fix one of those failure points. After 500 plus completed Ottawa projects, we are confident enough in the model to explain it openly, including where it differs from the traditional GC approach and which clients it does not fit.
1. The free 48-hour lot feasibility review
Before we quote a renovation, we tell you whether what you want is even legal on your lot.
For free, within 48 hours of you reaching out, our team pulls your zoning (Ottawa By-law 2008-250), checks setback requirements, lot coverage, height restrictions, and any heritage or floodplain constraints. We tell you whether your dream addition fits the envelope, whether your basement can be legally converted to a secondary suite, and whether a coach house is allowed on your lot.
This sounds basic. It is not. We have walked into homes where another contractor had taken a deposit and started drawings for an addition that was zoning-illegal. The owner had no idea until the permit was rejected six months and a five-figure deposit later. Our 48-hour feasibility check is built specifically to never let that happen.
It is free because it has to be. If we charged for it, fewer people would do it, and more people would walk into projects they should not have started. Bill 23 changed parts of the rules on secondary dwelling units in 2023. Most homeowners do not know what their lot allows, and they should not have to.
2. BCIN-certified in-house
The BCIN credential (Building Code Identification Number) is the Ontario Ministry of Municipal Affairs and Housing certification that lets you stamp your own designs as code-compliant for permit submission. It requires passing five Ministry exams and maintaining ongoing professional development.
Most Ottawa GCs do not have it. They contract out the design and code-compliance work to a third-party BCIN designer or architect. That works, but it adds friction: the designer drew the plan, the GC has to build it, and the homeowner is in the middle when the two disagree about details.
We carry BCIN in-house. The designer drawing your plan is the same firm that will build it. When the framer hits a beam location that needs to shift two inches, the change happens on a phone call, not in a five-day round trip through three offices.
Why BCIN matters in Ottawa specifically
Ottawa's permit volume is high enough that the city's plan reviewers are sharp. Drawings that meet the bare minimum get rejected and returned with comments. Drawings that are detailed, proper, and from a known submitter (the city's plan reviewers see our submissions weekly) move faster. We have permits issued in 4 to 6 weeks on jobs where homeowners doing it alone wait 12 to 16 weeks. The BCIN is partly about quality, partly about reputation with the reviewers.
3. Our in-house cabinet shop
We build cabinets in-house in our Ottawa-area shop. Not subcontracted to a third party, not flat-pack from a catalogue. Real custom cabinetry, fabricated to the exact dimensions of your room, with our crew, from our suppliers.
Why this matters:
- Custom dimensions cost the same as standard. The constraint of "30-inch increments only" comes from cabinet shops that buy boxes from a manufacturer and only modify doors. Building from raw materials, a 28.75-inch cabinet costs the same as a 30-inch cabinet. Your kitchen fits the room exactly.
- Lead time is shorter and more predictable. Catalogue cabinets currently run 8 to 14 weeks. Our shop runs 4 to 7 weeks because we control the queue.
- If something is wrong, we fix it. A door cracked during install? We rebuild it that week, not in three months when the manufacturer's warranty queue clears. Boxes that arrived with the wrong stain depth? We refinish them in our shop.
- We can match heritage millwork. A 1920s Glebe row house with a profile that no catalogue carries? We mill the profile.
The trade-off: our cabinet pricing is mid-tier, not budget-tier. We are not the cheapest cabinet supplier in Ottawa. We are not trying to be. We compete on fit, finish, and durability, not on price-per-linear-foot.
4. Fixed-price contracts
Our contracts are fixed-price, not cost-plus. The price you sign is the price you pay, barring genuine scope changes (you decide to add a bathroom we did not quote, the city demands a structural change at permit, an existing condition was hidden behind a wall and could not have been quoted).
Cost-plus is the default model in residential renovation, particularly on larger jobs. It puts all the cost risk on the homeowner. Time over-runs, material over-runs, mistakes by subs, all flow back to the homeowner's invoice. Cost-plus is fine if your contractor is honest and the homeowner is sophisticated. In our experience, neither condition holds in most Ottawa residential jobs.
Fixed-price puts the risk on us. If we mis-estimate, we eat it. That forces our quoting process to be careful: we do site measures, we verify behind-the-wall conditions where possible, we build contingency lines into the price (typically 8 to 12 percent), and we sign a contract that says what it costs.
Fixed-price is harder to quote and slower to issue. We typically take 2 to 3 weeks to issue a fixed-price quote on a kitchen or bathroom, and 4 to 6 weeks on a whole-home or addition. The homeowners we work with prefer that wait to the open-ended risk of cost-plus. If you do not, we are probably not the right fit.
5. The layered warranty
Most contractors offer a one-year warranty on their workmanship. That is the legal floor. We do that, plus more.
- 1-year DTR warranty on all our workmanship. Anything we built that fails within 12 months of completion, we fix at no charge.
- 25-year manufacturer warranty on our cabinetry construction (passed through from our materials suppliers and backed by our shop).
- 10-year structural warranty on additions, structural alterations, and load-path changes. Foundation, framing, primary structure for a decade.
The reason this is layered is that different parts of a renovation have different failure modes. Workmanship issues show up in the first 12 months. Cabinet construction issues are typically a 5-to-15 year window. Structural issues, when they happen, show up in years 3 to 8. The warranty matches when problems actually appear.
The single most useful question a homeowner can ask a contractor is what happens five years after the project finishes. If the answer is vague, the contractor does not expect to be in business that long. If the answer is specific, you know what you are buying.
6. The honest comparison to the traditional GC model
The traditional Ottawa GC model works like this. Homeowner hires a designer (architect or BCIN designer) to draw plans. The designer's fee is a separate line item that scales with the scope of the drawings. Plans go out to bid. Three GCs quote the same drawings. Homeowner picks one (often the lowest, which is usually the wrong call). GC builds. Designer is involved for site visits but not in daily decisions. Subs are managed by the GC. Cabinets, counters, and finishes are sourced from third-party suppliers.
That model has real strengths:
- Bid competition theoretically keeps prices honest.
- Separation of design and build means the designer represents the homeowner's interest against the GC.
- Heritage architects bring deep specialty knowledge that a design-build firm may not.
- Some clients value the formality of a fully separated process.
That model also has real weaknesses, which we built our model to fix:
- The designer and the builder are not the same person, so detail decisions on site become an argument.
- Three GCs bidding the same drawings interpret them differently. The lowest bid usually missed something.
- Cabinet suppliers carry their own lead times, warranties, and finger-pointing. We have seen kitchens stall for 8 weeks waiting on a delaminated door from an out-of-province cabinet supplier.
- The homeowner becomes the project manager by default, mediating between designer, GC, sub, and supplier.
The design-build model we use compresses all those parties into one firm. Single contract, single point of contact, single warranty. Less friction, less finger-pointing, faster decisions.
Where our model does not fit
We are not the right contractor for everyone. Specifically:
- Heritage projects requiring a specialist architect. A century-and-a-half-old Centretown stone house with original plaster medallions needs a heritage architect, not a design-build firm.
- Clients who want to bid the same drawings to three contractors. Our model is not built for that. We design what we will build, and we quote what we designed.
- Cost-plus-only clients. If you want full transparency on every line item and you have the time and skill to manage that, a cost-plus relationship with a smaller GC may suit you better.
- Small single-room refreshes. Our overhead is built around mid-to-large projects. A minor bathroom refresh is more efficiently handled by a smaller specialist.
Where to start
Most Ottawa homeowners are mid-flight on their decision when they reach out, not at the very beginning. Common entry points: they have a rough idea of what they want, they have a budget range, and they want to know if it is feasible and roughly what it will cost.
The 48-hour feasibility review is the right starting point for almost everyone. Free, fast, and it answers the questions that should come before drawings. After that, our home renovation page covers the design phase, and our project estimating page covers how the fixed-price quote gets built. Read those, then call us at 613-862-4555 if it sounds like a fit. We answer our own phone.